Home /  How to measure double roller blinds

How to Measure Double Roller Blinds

Recess Fitting for Double Roller Blinds

This is the measurement you need to make if you want the blind to fit inside the window recess. Measure the full width & height of the 'recessed' area (wall to wall), as shown in the diagram below taking the smallest measurement.  The 'recess' depth must be at least 12cm. We will make the blind size to the measurements specified by you on order, less any deductions as outlined on the product information tab.

 

Tips

  • use a steel metal tape measure for accuracy and measure in centimetres to the nearest millimetre.
  • measure in 3 places for both 'width' and 'height' then use the smallest measurements for ordering. Always double check your measurements!
  • don't make any deductions for 'recess' specified blinds because the factory will do that to ensure the blind fits perfectly.
  • lookout for any obstructions such as window handles, tiles, dado rails etc and take their position into account if necessary.
 

Exact Fitting for Double Roller Blinds

This is the measurement you need to take if you want the blind to hang outside of the window recess.  We will make the blind size to the measurements specified by you on order, less any deductions as outlined on the product information tab.

 

 

Tips

  • measure the exact width of the area you would like the blind to cover. To minimize light leakage we would recommend an overlap of 6cm on either side & 7cm at the top of the window.
  • the overlap at the bottom of the window is a matter of personal choice.
  • lookout for any obstructions such as tiles, dado rails, radiators etc and take their position into account if necessary.
 
 
 

Important Note

  • The minimum depth required if fitting the 'double roller blind' inside the recess must be at least 12cm.
  • The width of a Roller Blind is always the 'bracket' to 'bracket' measurement and not the 'cloth (fabric)' width. The fabric will always be shorter by between 2.8cm to 4.4cm depending on the blind size ordered. The Roller Blind will always be manufactured with 'extra' fabric on the length to ensure the tube is covered and not visible when the blind is fully extended to the height ordered. ended to the height ordered. We will make the blind size to the measurements specified by you on order, less any deductions as outlined on the product information tab.

 

 

 

Fabric width guide & allowances for Roller blinds:

The allowance made to calculate your cloth size is simply your blind size 'less the width deduction' value displayed in the table below. (Please note we work to an operating tolerance of +/- 5mm).

 

          Brand

  Blind Width (cm) 

          from

   Blind Width (cm) 

            up to

   Blind

   Type  

Width Deduction

Height Deduction

    For 'Exact'

   deduct (cm)  

   For 'Recess'

  deduct (cm)  

   For 'Exact'

  deduct (cm)  

   For 'Recess'

  deduct (cm) 

TRADITIONS

36

198.1

chain

3.2

3.6

N/A

N/A
               

 

Help & Advice?

 
www.blinds4uk.co.uk